China OEM Japan Technology 6000L 8000L 9000L 10000L Fire Engine Truck Fire Truck pto shaft cover safety chain

Merchandise Description

Element 1 : Organization Quick INTRODUCTION

Japan engineering 6000L 8000L 9000L 10000L hearth motor truck hearth truck

1, ChengLi Unique Car Co.,Ltd, which was appointed by the Advancement and Reform Committee of China, is the most significant specific purpose automobile manufacturer in China.also we are famous maker producing all kinds of specific vans for municipal & environmental design, virescence, petrol & medicals, container, and semi-trailer. Manufacturers registered include CLW.Our firm has independent export proper and has a mount of consumers in overseas. Our major varieties consist of much more than one hundred varieties of vehicles and relevant items this sort of as water truck, fecal suction truck, rubbish truck, refuse compactor, sewage suction truck, gas tank, large-altitude procedure truck, truck with crane, dump truck, educational truck, van truck, semi-trailer, hearth engine, fridge truck, drinking water wagon, tractor, substantial-altitude water truck, bulk cement truck, chemical liquid truck, concrete mixer truck, and other folks. 
 
2.Our firm has CZPT technologies, flawless inspection, superior equipment, reliable high quality and adaptable modes of procedure. What’s more, our company has roundly passed ISO9001:2000 and CCC (China Compulsory Certification) certifications. Series trucks of Cheng Li have procured outstanding achievements interiorly, specially from the expense in South Suburb Cheng Li Automobile Market Park.
 We have been in this discipline for over 10 many years, we have more than three hundred types  of particular vans, our workers are more than 1000 and manufacturing unit is more than 690,000m2 .We have productively exported our vehicles to Ghana, Sudan, Nigeria, Tajikistan, Namibia, Burma, Korea, Iran, Iraq, Vietnam and many others. a lot of Africa & Asia countries more than 4000 trucks every year. 

3.Top quality manage:our company truck pass ISO,3C,BV certification.
our manufacturing facility have the high quality Quality Inspection Section.prior to sending truck for facotry ,our good quality inspection division will examine the truck carefully.

four.Design and style potential :Our factory have thirty technician and designer.

5. Exhibition:our manufacturing facility go to the HangZhou Trade Honest every calendar year.

6. Export industry: Africa,Asia,South The united states,Pacific and so on

7.Our business cooperate with well-known chasis producers,consist of all chinese brand like CZPT , XIHU (WEST LAKE) DIS.FENG , CZPT , CZPT , CZPT , GENLYON , NORTHBENZ , CZPT , JAC , CZPT . 

Element 2:Japan technology 6000L 8000L 9000L 10000L hearth motor truck hearth truck specification :
 

Component 3:Japan engineering 6000L 8000L 9000L 10000L fire motor truck fire truck

Item device parameter
Chassis design   QL1160AMFRY
Overall proportions mm 8125*2480*3350
  Simple fact h2o cubage L 6000
  GVW kg Appro×15330
  Kurb Excess weight kg 9196
  Wheel base mm 4500
  F/R keep track of base   1960/1855
  Technique/departure angle ° 26/15
Engine model 6HK1-TCNG40
  displacement 7790ml/241l/HP
  Sort Inline 6-cylinder drinking water-cooled four-stroke turbocharged inter-cooled
Transmission Kind  MLD
6 pace, 6 forward ,1 reverse
Max velocity km/h 95
Tire specification 6nons 10.00-20 Traction technique 4×2
Number of axles 2 Electric method 24v
Allowable passengers in cab 6 Fuel Usage 22.4L/100KM
axles entrance 6.3Ton
  rear 13Ton
  Tank material Water tank Carbon steel  , hot dip galvanized ,Intermediate Baffer plate
    Foam tank carbon steel
     
  Tank potential 6000L
  Water pump Type centrifugal pump
    brand  
    Capacity 60L/[email protected]
      25L/[email protected]
      50L/[email protected]
    Max force 2.4MPa@10L/S
    Pump materials casing Forged Iron
      impeller bronze
      impeller shaft  
    Power to pump transmission PTO
  Hearth keep an eye on Type MCMW800,rotate 360 , incline +eighty five , decrease -fifty five
    Working approach By guide ,adjustable spreader and stream jet
    capacity 50L/[email protected]
    range Water/foam  60/55m
  Drinking water Pipe Steel pipe Sch forty, hot dip galvanizedd

Component 4: Manufacturing facility Certification:

Component 5:Delivery:

PART6: FAQ:

 

Q1. Good quality handle
A:We make quality management for every single action even though generating and before delivery.

Q2. What is your conditions of payment?
A: T/T 30% as deposit, and 70% prior to shipping and delivery. We will show you the images of the goods and offers just before you shell out the harmony.

   LC conditions is also can be acknowledged .

Q3. What is your terms of shipping and delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .

This fall. How about your delivery time?
A: Normally, it will get ten to twenty times right after getting your progress payment. The specific shipping time is dependent on the objects and the quantity of your get.

For common products, shipping and delivery time is as below:

Water tanker truck:7 times
Gasoline tanker trailer:fifteen-20days
Rubbish truck:15 days
Sweeper highway truck:twenty five days
Wecker truck:7-ten times
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:twenty days
Concrete mixer truck:7-twenty five times
LPG :twenty-thirty days
LED truck:7-fifteen times
(the previously mentioned is still left hand generate chassis ,if you want the correct hand push chassis ,delivery time is longer than Remaining hand generate truck,In depth clauses are topic to deal .)

Q5. Can you generate according to the samples?
A: Indeed, we can produce by your samples or complex drawings. We can construct the molds and fixtures.

Q6. How to management truck top quality?
A: we have Rich expertise workers and engineer to control good quality before and on creation , we strictly adopted State unique truck technological specification and security generation specification .

We have been in this line for more than 15 a long time, working with all varieties of special vans and trailers.

Q7. Do you take a look at all your goods ahead of shipping?
A: Of course, we have 100% test before supply

Q8: How do you make our enterprise prolonged-phrase and excellent partnership?
A:1. We keep very good top quality and aggressive value to guarantee our clients reward
2. We regard each client as our good friend and we sincerely do organization and make friends with them,no issue exactly where they come from.

Q9. Did you sell truck to our nation ahead of?

A:Our principal market place is Africa, Asia, South The united states , Oceania ,middle east , annual revenue is about 5000units and trying to keep growing every single year .

Component 7: Consumers Going to
Part 8: Products Assortment

 

After-sales Service: 12months
Warranty: 12months
Type: Tanker
Certification: ISO9000, CCC
Volume: 7001-10000L
Emission Standard: Euro 3
Customization:
Available

|

Customized Request

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China OEM Japan Technology 6000L 8000L 9000L 10000L Fire Engine Truck Fire Truck   pto shaft cover safety chainChina OEM Japan Technology 6000L 8000L 9000L 10000L Fire Engine Truck Fire Truck   pto shaft cover safety chain
editor by CX 2023-04-13